Description
iPRD40r modular surge arrester – 3P – IT – 460V – with remote transfert
Product Reference: A9L40321
This Acti9 iPRD40r surge arrester protects 3P installations. It allows quick replacement of damaged cartridges. This Type 2 device is recommended for high risk level in incoming panel board. It offers remote reporting of the “cartridge must be changed” message. It can be turned over to allow the phase/neutral/earth cables to enter through either the top or the bottom. The associated circuit breaker Isc breaking capacity can go up to 50kA. It is compatible with TT and TN-S earthing system. The Uc maximum continuous operating voltage in common mode (between phase and earth) is 460VAC. The Up Voltage protection level in common mode (between phase and earth) is 2.2kV. The Ue rated operational voltage is 230VAC or 400VAC +/- 10%. The product colour is white (RAL9003).The dimensions are (W) 54mm x (H) 85mm x (D) 69mm. The weight is 340g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product is compliant with EN 61643-11 and IEC 61643-11 standards.
Specifications
Range of product: IPRD
Range: Acti9
Product name: Acti9 iPRD
Product or component type: Surge arrester with pluggable cartridge
Device short name: iPRD40r
Device application: Distribution
Standards: EN 61643-11:2012
IEC 61643-11:2011
Product certifications: CE
Poles description: 3P
Remote signalling: With
Signal contacts composition: 1 SD (1 C/O)
Surge arrester type: Electrical distribution network
Earthing system: IT
Surge arrester class type: Type 2
Surge arrester technology: MOV
[Ue] rated operational voltage: 400 V AC (+/- 10 %) at 50/60 Hz
Nominal discharge current: Common mode: 15 kA (L/PE)
Maximum discharge current: Common mode: 40 kA L/PE
[Uc] maximum continuous operating voltage: Common mode: 460 V L/PE
Maximum [Up] voltage protection level: Common mode 2.2 kV type 2 L/PE
[Ut] temporary overvoltage: 337 V L/N 5 s withstand
1455 V L/PE 200 ms safe failure mode
1455 V N/PE 200 ms safe failure mode
Short-circuit withstand: 5 kA 415 V Ph/Ph
Disconnector device type: Associated fuse gG 63 A – Icu 15 kA
Associated fuse gG 80 A – Icu 50 kA
Associated circuit breaker NG125L 40 A curve C – Icu 50 kA
Associated circuit breaker NG125H 40 A curve C – Icu 36 kA
Associated circuit breaker IC60N 40 A curve C – Icu 10 kA
Associated circuit breaker iC60H 40 A curve C – Icu 15 kA
Associated circuit breaker NG125N 40 A curve C – Icu 25 kA
Signalling circuit voltage: 0.25 A/250 V AC 50/60 Hz
Mounting mode: Clip-on (DIN rail)
9 mm pitches: 6
Height: 85 mm
Width: 54 mm
Depth: 69 mm
Net weight: 340 g
Colour: White (RAL 9003)
[Ipe] Ground residual current: 0.6 mA
Connections – terminals: Tunnel type terminal (top or bottom) 2.5…25 mm² rigid
Tunnel type terminal (top or bottom) 4…16 mm² flexible
Tunnel type terminal (top or bottom) 4…16 mm² flexible with ferrule
Wire stripping length: 14 mm
Tightening torque: 3.5 N.m
Targeted country: All
Compatibility code: IPRD40r
Relative humidity: 5…95 %
Operating altitude: 2000 m
Ambient air temperature for operation: -25…60 °C
Ambient air temperature for storage: -40…85 °C
Warranty (in months): 18
