Description
DSE201 M C40 A30 – N Blue
Product ID: 2CSR275151R1404
Catalog Description: Residual Current Circuit Breaker with Overcurrent Protection DSE201 M – 1P+N – 30 mA – 40 A – C – Type A
Description: 1P+N electronic RCBO in one-module width for the protection of end user single-phase circuits against overload and short-circuit currents; protection against the effects of sinusoidal alternating earth fault currents; protection against indirect contacts and additional protection against direct contacts (with sensitivity = 30 mA). Presence of neutral (blue or black) and functional earth (white) flying leads. The neutral is unswitched.
Type of Residual Current: Type A
Maximum Operating Voltage: 264 V
Test Voltage (Ut): 195 … 264 V
Dielectric Test Voltage: 2 kV
Breaking Capacities: Rated Ultimate Short-Circuit Breaking Capacity (Icu): 15 kA, Rated Residual Breaking Capacity (IΔm): 10 kA, Rated Service Short-Circuit Breaking Capacity (Ics): 7.5 kA
Maximum Surge Current: 0.25 kA
Power Supply Connection: Bottom
Contact Position Indication: Red ON / Green OFF
Energy Limiting Class: 3
Electrical Endurance: 10000 cycle
Mechanical Endurance: 20000 cycle
Poles: Number of Protected Poles: 1, Number of Poles: 1P+N
Number of Modular Spacings per DIN Rail: 1
Fault Indication: Blue Window
Operating Characteristic: Instantaneous
Position of Neutral Terminals: Right
Tightening Torque: Top 1.2 N·m, Bottom 2.8 N·m
Accessories: Auxiliary contact, Auxiliary/Signal contact, Shunt trip, Undervoltage release, Overvoltage release, Bottom fitting auxiliary contact
Actuator Type: Toggle – Insulation group II, black, sealable in ON-OFF positions
Earthing Switch Type: Undelayed
Housing Type: Insulation group II, RAL 7035
Screw Terminal Type: Failsafe Bi-directional Cylinder-lift Terminal
Connecting Capacity (Busbar, Rigid, Flexible): 10 mm², 1…35 mm², 1…16 mm²
Rated Cross-Section (Solid-Core, Multi-Wired): 1…35 mm², 1 … 25 mm²
Wire Stripping Length (Top, Bottom): 1.1 cm, 1.25 cm
Terminal Type: Screw Terminals
Electrical Ratings: Short-Circuit Current Rating (SCCR): 0.03 A, Tripping Characteristic: C, Rated Operational Voltage: acc. to IEC 60898-1 240 V, Rated Insulation Voltage (Ui): acc. to IEC/EN 60664-1 500 V, Rated Impulse Withstand Voltage (Uimp): 4 kV, Input Voltage Type: AC, Rated Current (In): 40 A, Rated Residual Current: 30 mA, Rated Short-Circuit Capacity: 10 kA, Rated Conditional Short-Circuit Current (Inc): 10 kA, Rated Frequency (f): 50 … 60 Hz, Power Loss: Total 5.5 W, Overvoltage Category: III
Environmental Ratings: Ambient Air Temperature Operation: -25 … 55 °C, Reference Ambient Air Temperature: 30 °C, Degree of Protection: IP20 / IP40, Pollution Degree: 2, Environmental Conditions: 28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %, Resistance to Vibrations: 20 Cycles with Load 0.8 In: 5g or 0.35mm 5 … 150 Hz, Resistance to Shock acc. to IEC 60068-2-27: 30g / 2 shocks / 13 ms
Dimensions: Width: 1.8 cm, Height: 11.5 cm, Depth/Length: 6.9 cm, Built-In Depth (t2): 6.89 cm
Weight: 0.2 kg
Mounting: DIN-Rail, Position: Any
Package: box 1 piece, Gross Weight: 0.22 kg
Standards: IEC 61009-1, IEC 61009-2-2, AS/NZS 61009.1, BS EN 61009-1
RoHS Declaration: 9AKK106930A1510, Following EU Directive 2011/65/EU, Date: 20160829
REACH Declaration: True – contains substances > 0.1 mass percentage, Date: 20240429
WEEE Category: 5. Small Equipment (No External Dimension More Than 50 cm), Business To Consumer
Declaration of Conformity: EU Declaration of Conformity_DSE201 M
