Description
SH201M-C50 Miniature Circuit Breaker
Type: SH200M – 1P – 50 A – C – (AC) 10 kA
Manufacturer: ABB
Electrical Features: Rated Operational Voltage according to IEC 60898-1 is 230 V, operational voltage range from 12 V AC minimum to 253 V AC maximum including tolerance. Rated insulation voltage Ui is 440 V and impulse withstand voltage Uimp is 4 kV normally, 5 kV at 2000 m altitude and 6.2 kV at sea level. Rated current In is 50 A. The rated short-circuit capacity is 10 kA at AC, with a conditional short-circuit current Inc of 25 kA. Frequency rating is 50 / 60 Hz. Power loss at rated operating conditions per pole is 3.25 W. The tripping characteristic is type C and overvoltage category is III.
Mechanical and Installation: The breaker has one pole (1P) with one protected pole. Mechanical endurance is 20000 cycles and electrical endurance is 10000 AC cycles. The device uses toggle actuator type with I / O marking and is made of Insulation Group II black, sealable material. It uses cage type screw terminals and the tightening torque is 2 N·m. Connection capacity accommodates flexible wires with ferrule 0.75 to 16 mm², flexible 0.75 to 16 mm², rigid 0.75 to 25 mm², stranded 0.75 to 25 mm², and conductor up to 25 mm². Mounting is on TH35-15 or TH35-7.5 mm modular DIN rails acc. to IEC 60715 at any position.
Dimensions: The product width corresponds to 1 modular spacing acc. to DIN 43880. Net dimensions are width 1.75 cm, height 8.8 cm, depth 6.9 cm with built-in depth of 6.9 cm. Net weight is approximately 0.11 kg with pole weight 0.125 kg.
Environmental: Operates at ambient air temperature from -25 to +55 °C and stores at -40 to +70 °C with reference ambient temperature of 30 °C. Protection degree is IP20, with enclosure cover rated at IP40 and pollution degree 2. Passes 28 cycles environmental conditions with varied heat and humidity. Resistance to vibrations is 20 cycles at 5g between 5 and 150 Hz and shock resistance is 25g, 2 shocks of 13 ms according to IEC 60068-2-27.
Compliance and Sustainability: Product follows RoHS directive 2011/65/EU with amendment 2015/863, RoHS exemption information available. REACH regulation is complied with; product does not contain substances above 0.1 mass percentage. Toxic Substances Control Act (TSCA) information available. WEEE category 5 for small equipment below 50 cm dimension; product is for business to business use. Recyclability is rated at 92.1 % according to EN45555.
Certifications and Standards: Certified according to IEC/EN 60898-1 and supports CE declaration of conformity. Classification codes include ETIM EC000042, UNSPSC 39121603, eClass 27141901, and IDEA IGCC 4897 for miniature circuit breakers.
