الوزن | 2 كيلوجرام |
---|
الأبعاد | 15.0 × 10.7 × 14.3 سنتيميتر |
---|
Customs Tariff Code | US1CP4D22157 |
---|
Device Short Name | ATV212 |
---|
Product Destination | Asynchronous motors |
---|
Phase | 3 |
---|
Motor Power kW | 1.5 |
---|
Maximum Horse Power Rating | 2 |
---|
Supply Voltage Limits | 323…528 V |
---|
Supply Frequency | 50…60 Hz – 5…5 % |
---|
Line Current 480V | 2.5 |
---|
Line Current 380V | 3.2 |
---|
Range of Product | Altivar 212 |
---|
Product or Component Type | Variable speed drive |
---|
Product Specific Application | Pumps and fans in HVAC |
---|
Communication Port Protocol | APOGEE FLN, BACnet, Modbus, LonWorks, METASYS N2 |
---|
Us Rated Supply Voltage | 380…480 V – 15…10 % |
---|
EMC Filter | Class C2 EMC filter integrated |
---|
Apparent Power | 2.8 kVA 380 V |
---|
Continuous Output Current 380V | 3.7 |
---|
Continuous Output Current 460V | 3.7 |
---|
Maximum Transient Current | 4 A 60 s |
---|
Speed Drive Output Frequency | 0.5…200 Hz |
---|
Speed Range | 1…10 |
---|
Speed Accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
---|
Local Signalling | 1 LED (red) for DC bus energized |
---|
Output Voltage | <= power supply voltage |
---|
Isolation | Electrical between power and control |
---|
Type of Cable | Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR; Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC; With UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC |
---|
Electrical Connection | VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 2.5 mm² / AWG 14; L1/R, L2/S, L3/T terminal 6 mm² / AWG 10 |
---|
Tightening Torque VIA | 0.6 N.m |
---|
Tightening Torque L1R L2S L3T | 1.3 N.m |
---|
Supply | Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection; Internal supply 24 V DC 21…27 V, <200 A overload and short-circuit protection |
---|
Sampling Duration | 2 ms +/- 0.5 ms F discrete, 2 ms +/- 0.5 ms R discrete, 2 ms +/- 0.5 ms RES discrete, 3.5 ms +/- 0.5 ms VIA analog, 22 ms +/- 0.5 ms VIB analog |
---|
Response Time | FM 2 ms +/- 0.5 ms analog, FLA, FLC 7 ms +/- 0.5 ms discrete, FLB, FLC 7 ms +/- 0.5 ms discrete, RY, RC 7 ms +/- 0.5 ms discrete |
---|
Accuracy VIA VIB FM | +/- 0.6 % VIA and VIB for a temperature variation 60 °C; +/- 1 % FM for a temperature variation 60 °C |
---|
Linearity Error | VIA +/- 0.15 % of maximum value input; VIB +/- 0.15 % of maximum value input; FM +/- 0.2 % output |
---|
Analogue Output Type | FM switch-configurable voltage 0…10 V DC 7620 Ohm 10 bits; FM switch-configurable current 0…20 mA 970 Ohm 10 bits |
---|
Discrete Output Type | Configurable relay logic FLA, FLC) NO – 100000 cycles; Configurable relay logic FLB, FLC) NC – 100000 cycles; Configurable relay logic RY, RC) NO – 100000 cycles |
---|
Minimum Switching Current | 3 mA 24 V DC configurable relay logic |
---|
Maximum Switching Current | 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R; 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R; 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R; 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R |
---|
Discrete Input Type | F programmable 24 V DC level 1 PLC 4700 Ohm; R programmable 24 V DC level 1 PLC 4700 Ohm; RES programmable 24 V DC level 1 PLC 4700 Ohm |
---|
Discrete Input Logic | Positive logic (source) F, R, RES), <= 5 V, >= 11 V; Negative logic (sink) F, R, RES), >= 16 V, <= 10 V |
---|
Dielectric Strength | 3535 V DC between earth and power terminals; 5092 V DC between control and power terminals |
---|
Insulation Resistance | >= 1 mOhm 500 V DC for 1 minute |
---|
Frequency Resolution | Display unit 0.1 Hz; Analog input 0.024/50 Hz |
---|
Communication Service | Read device identification (43); Time out setting from 0.1 to 100 s; Monitoring inhibitable; Write single register (06); Read holding registers (03) 2 words maximum; Write multiple registers (16) 2 words maximum |
---|
Option Card | Communication card LonWorks |
---|
Power Dissipation W | 78 |
---|
Air Flow Gal hr US | 7132.8 |
---|
Functionality | Mid |
---|
Specific Application | HVAC |
---|
Variable Speed Drive Application Selection | Building – HVAC compressor for scroll, Building – HVAC fan, Building – HVAC pump |
---|
Motor Power Range AC 3 | 1.1…2 kW 380…440 V 3 phase; 1.1…2 kW 480…500 V 3 phase |
---|
Motor Starter Type | Variable speed drive |
---|
Discrete Output Number | 2 |
---|
Analogue Input Number | 2 |
---|
Analogue Input Type | VIA switch-configurable voltage 0…10 V DC 24 V max 30000 Ohm 10 bits; VIB configurable voltage 0…10 V DC 24 V max 30000 Ohm 10 bits; VIB configurable PTC probe 0…6 probes 1500 Ohm; VIA switch-configurable current 0…20 mA 250 Ohm 10 bits |
---|
Analogue Output Number | 1 |
---|
Physical Interface | 2-wire RS 485 |
---|
Connector Type | 1 open style, 1 RJ45 |
---|
Transmission Rate | 9600 bps or 19200 bps |
---|
Transmission Frame | RTU |
---|
Number of Addresses | 1…247 |
---|
Data Format | 8 bits, 1 stop, odd even or no configurable parity |
---|
Type of Polarization | No impedance |
---|
Asynchronous Motor Control Profile | Voltage/frequency ratio – Energy Saving, quadratic U/f; Voltage/frequency ratio, 5 points; Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo); Voltage/frequency ratio, 2 points; Flux vector control without sensor, standard |
---|
Torque Accuracy | +/- 15 % |
---|
Transient Overtorque | 120 % of nominal motor torque +/- 10 % 60 s |
---|
Acceleration and Deceleration Ramps | Linear adjustable separately from 0.01 to 3200 s; Automatic based on the load |
---|
Motor Slip Compensation | Adjustable; Not available in voltage/frequency ratio motor control; Automatic whatever the load |
---|
Switching Frequency | 6…16 kHz adjustable; 12…16 kHz with derating factor |
---|
Nominal Switching Frequency | 12 kHz |
---|
Braking to Standstill | By DC injection |
---|
Network Frequency | 47.5…63 Hz |
---|
Prospective Line Isc | 5 kA |
---|
Protection Type | Overheating protection drive; Thermal power stage drive; Short-circuit between motor phases drive; Input phase breaks drive; Overcurrent between output phases and earth drive; Overvoltages on the DC bus drive; Break on the control circuit drive; Against exceeding limit speed drive; Line supply overvoltage and undervoltage drive; Line supply undervoltage drive; Against input phase loss drive; Thermal protection motor; Motor phase break motor; With PTC probes motor |
---|
Pollution Degree | 2 IEC 61800-5-1 |
---|
IP Degree of Protection | IP21 |
---|
IP Degree of Protection Complementary | IP20 on upper part without blanking plate on cover IEC 61800-5-1; IP20 on upper part without blanking plate on cover IEC 60529; IP21 IEC 61800-5-1; IP21 IEC 60529; IP41 on upper part IEC 61800-5-1; IP41 on upper part IEC 60529 |
---|
Vibration Resistance | 1.5 mm (f= 3…13 Hz) conforming to IEC 60068-2-6; 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-8 |
---|
Shock Resistance | 15 gn 11 ms IEC 60068-2-27 |
---|
Environmental Characteristic | Classes 3C1 conforming to IEC 60721-3-3; Classes 3S2 conforming to IEC 60721-3-3 |
---|
Noise Level | 51 dB 86/188/EEC |
---|
Operating Altitude ft | 3280.84…9842.52 ft limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m; <= 3280.84 ft (1000 m) without derating |
---|
Relative Humidity | 5…95 % without condensation IEC 60068-2-3; 5…95 % without dripping water IEC 60068-2-3 |
---|
Ambient Air Temperature for Operation F | 14…104 °F (-10…40 °C) (without derating); 104…122 °F (40…50 °C) (with derating factor) |
---|
Operating Position | Vertical +/- 10 degree |
---|
Product Certifications | UL; NOM 117; C-tick; CSA |
---|
Marking | CE |
---|
Standards | EN 55011 class A group 1; IEC 61800-3 environments 2 category C1; EN 61800-3 category C3; IEC 61800-3; IEC 61800-3 environments 2 category C2; IEC 61800-3 environments 2 category C1; IEC 61800-3 environments 1 category C3; UL Type 1; IEC 61800-3 environments 2 category C3; IEC 61800-3 environments 1 category C2; IEC 61800-3 environments 1 category C3; IEC 61800-3; IEC 61800-3 environments 1 category C2; IEC 61800-3 environments 2 category C3; IEC 61800-3 environments 1 category C1; IEC 61800-5-1; IEC 61800-3 category C3; IEC 61800-3 category C2; IEC 61800-5-1; IEC 61800-3 category C2; IEC 61800-3 environments 1 category C1; IEC 61800-3 environments 2 category C2 |
---|
Assembly Style | With heat sink |
---|
Electromagnetic Compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; 1.2/50 µs – 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
---|
Regulation Loop | Adjustable PI regulator |
---|
Ambient Air Temperature for Storage F | -13…158 °F (-25…70 °C) |
---|
Category | US1CP4D22157 |
---|
Discount Schedule | CP4D |
---|
Returnability | Yes |
---|
Country of Origin | ID |
---|
Unit Type of Package 1 | PCE |
---|
Nbr of Units in Pkg 1 | 1 |
---|
Package 1 Height cm | 17.5 |
---|
Package 1 Width cm | 17.3 |
---|
Package 1 Length cm | 20.5 |
---|
Package Weight Lbs | 4.359 |
---|
Package Weight kg | 1.977 |
---|
Unit Type of Package 2 | S06 |
---|
Number of Units in Package 2 | 27 |
---|
Package 2 Height cm | 75 |
---|
Package 2 Width cm | 60 |
---|
Package 2 Length cm | 80 |
---|
Package 2 Weight Lbs | 143.722 |
---|
Package 2 Weight kg | 65.191 |
---|
Warranty | 18 months |
---|