الوصف
BW440TPSN Enclosed Switch Disconnector
Encl. Switch Disconnector, 4-pole, 415V AC23, 25A, 11kW. Plastic enclosure with IP65 protection. The enclosure is made of rigid polycarbonate which is UV protected and resistant against low pressure water jets, suitable for outdoor and indoor use. Available in grey, yellow, and white colors. Cable entries are threaded with knockout holes for 2 parallel cables from both top and bottom. Membrane grommets are included providing IP54 protection. The grey side-operated handle is padlockable with one padlock and the cover is interlocked.
The switch supports a 5-wire system with a switchable neutral terminal and PE terminal. The terminals are easily accessible for straightforward installation.
Degree of Protection: IP65 according to IEC 60529.
Dimensions (WxHxD): 13.8 cm x 16.8 cm x 6.8 cm.
Weight: 0.41 kg.
Cable Capacity: Cable cross-section from 0.75 mm² to 10 mm². Cable entry position is Top and/or Bottom with 2xM32 and 2xM32+M16 outlets per side.
Electrical Characteristics: Conventional free-air thermal current (Ith) 40 A. Rated impulse withstand voltage (Uimp) 8 kV. Rated insulation voltage (Ui) 690 V IEC/EN 60664-1. Rated operational currents AC-22A: 40 A at 380-415 V, 25 A at 690 V. Rated operational current AC-23A: 25 A at 380-415 V, 25 A at 500 V, 16 A at 690 V. Rated operational power AC-23A: 11 kW at 380-415 V, 15 kW at 500 V, 11 kW at 690 V. Rated operational voltage main circuit: 690 V.
Connection: Screw clamp for 0.75 to 10 mm² including PE terminal.
Handle: Grey side-operated handle, padlockable (max 1 padlock).
Standards compliance: IEC 60947-1 and IEC 60947-3.
Other mechanical specs: Impact resistance rating Housing IK08. Number of poles: 4P. Maximum mounted auxiliary contacts: 1 NO, 0 NC. Wire stripping length: 7 mm. Tightening torque main circuit: 1.2 N·m. Recommended screwdriver: Pozidriv 2.
Minimum Order Quantity: 10 pieces.
Customs Tariff Code: 85363030.
