Description
Technical properties
Architecture
- Bus systemyes
- Fixing modeREG
Functions
- Multi-phase modesuitable to switch different external conductors
- Functionwith positioning function for blind and lamella position ; with safety functions e.g. for wind, rain, alarm ; with sun shade function
- Switchingfor switching, e.g. of 20 independent loads or activation of 10 drives
- Operating modeany combined operation from drive and switching functions possible
Configuration
- Number of modules10
Controls and indicators
- Indicator lampyes
- OperationManual operation can be activated via selection switch, thereby deactivation of the KNX function,manual operation per channel using button (single-area operation)
- Indication / displaystatus LED integrated in the manual operation button
- Manual selection switches / push-buttonsmanual operation buttons for on/off (up/down) and bus function on/off per channel/device
- Button / push-buttonwith illuminated programming button
Main electrical features
- Rated operational voltage Ue230 V
- Rated current16 A
Voltage
- Operating voltage over bus21…32 V DC
- Output voltage230 V~
- System supply voltage30V DC via bus
Electric current
- Bus current consumption (data transfer)5 mA
- Bus current consumption (idle)3 mA
- Number of entry circuits0
- Maximum through current16 A
- Rated current16 A
Dimensions
- Depth65 mm
- Width of rail mounted device (RMD)10 modules
- Height90 mm
Power
- Max. power with electronic transfo.1500 W
- Total power loss under IN1.3 W
- Output power2300 W
- Max. switching power28750 W
- Conventional transformers1500 VA
- Electronic transformers1500 W
Materials
- Colourlight grey
Lighting control
- Fluorescent lamps with electronical ballast (EB)20 x 36 W
- – uncompensated1200 VA
Fluorescent bulbs control
- Energy-saving lamps25 x 18 W
- Power lighting fluo lamps25x18W
- Max. power fluo. duo lamp comp. series27 X 36W
- Fluorescent lamps parallel compensated1000 W /130 µF
LED control
- Max number of LED/CFL lamps25
- 230V LED lamps25 x 18 W
- Power LED183 W
- LEDStatus LED integrated in manual operation button
Incandescent bulbs control
- Max. power with incandescent lamps2300 W
- 230 V incandescent lamps2300 W
- 230 V halogen lamps2300 W
- 230 V incandescent lamps and halogen lamps2300 W
Connection
- Connection cross-sect. flexible conductor0,5 / 4mm²
- Connection cross-sect. rigid cable0,5 / 6mm²
- Type of loadC-Load
- Conductor cross-section (flexible)0.5…4 mm²
- Conductor cross-section (rigid)0.5…6 mm²
- Type of contacts20F
- Bus coupling unitwith integral bus coupling unit
- Type of connectionwith QuickConnect plug-in terminals
- Bus connectionbus connection via connecting terminal
- Type of connectionwith screw
Settings
- Supported configuration modessystem
- Settingswitching time on change of direction adjustable
Scope of delivery
- Bus connection includedYes
Equipment
- Modular expandabilityNo
- Potential-freewith potential-free NO contacts as well as NC contact parameterisable
Use
- Differentiation characteristic 3 – Saleswith screw-in lift terminals
Safety
- Protection index IPIP20
Use conditions
- Operating temperature-5…45 °C
- Storage/transport temperature-20…70 °C
Identification
- Device familyTYM
- Main design lineKNX
- Search wordsNO contact output;Blind function;Blind control;Shading control;Multiple-channel actuators;Circuit controller;Circuit controller;Load controller;Sun protection;Socket outlet controller; KNX
