الوصف
Block Contactor AX18-30-01-84
Product ID: 1SBL921074R8401
AX09…AX25 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC. These contactors are of the block type design with 3 main poles and 1 built-in auxiliary contact. Control circuit is AC operated with add-on auxiliary contact blocks for front or side mounting and a wide range of accessories.
Dimensions (cm): Width 4.4, Depth 7.4, Height 7.4
Weight (kg): 0.326
Electrical ratings: Rated operational voltage 690 V (Auxiliary and Main Circuit), Rated frequency 50 / 60 Hz, Conventional free-air thermal current 28 A (IEC 60947-4-1), 16 A (IEC 60947-5-1) at Θ = 40 °C.
Rated operational current AC-1: 25 A at 220/240 V (55 °C), 27 A at 690 V (40 °C), 20 A at 690 V (70 °C)
Rated operational current AC-3: ranges from 9 A to 18 A depending on voltage level.
Rated operational current AC-15: 2 to 6 A depending on voltage.
Rated operational current DC-13: ranges from 0.55 A to 6 A depending on voltage with respective power in Watts.
Rated operational power AC-3: up to 9 kW depending on voltage.
Rated insulation voltage (Ui) 690 V according to IEC 60947-4-1 and VDE 0110 (Group C).
Rated impulse withstand voltage (Uimp): 6 kV (Auxiliary Circuit)
Maximum electrical switching frequency varies by application: AC-1 up to 600 cycles/h, AC-15 and AC-3 up to 1200 cycles/h, DC-13 up to 900 cycles/h.
Maximum mechanical switching frequency 3600 cycles/h.
Rated control circuit voltage (Uc): 110 V at 50 Hz, 110-120 V at 60 Hz.
Power loss at rated operating conditions AC-1 per pole 1 W, AC-3 0.2 W.
Operating times from coil energization and de-energization to contact action range from about 4 to 26 ms.
Degree of protection IP20 for auxiliary, coil and main terminals according to IEC 60529, IEC 60947-1, EN 60529.
Tightening torque 1 N·m for auxiliary, control and main circuits; screw terminals.
UL/CSA ratings: general use 30 A at 600 V AC; horsepower ratings up to 15 hp depending on voltage and phase; full load amps for motor use range from 14 A to 17.5 A.
Environmental ratings: ambient air temperature from -40 °C to 70 °C depending on fitting, storage temperature -60 °C to +80 °C. Climatic withstand per IEC 60068-2-30 and 60068-2-11, UTE C 63-100 Specification II. Maximum operating altitude 3000 m without derating.
Compliance: RoHS, REACH, TSCA, conflict minerals reporting template available.
Package Dimensions (cm): Width 4.8, Depth 7.8, Height 7.9; Gross Weight 0.34 kg; Minimum order quantity 1 piece.
Customs Tariff Code: 85364900















