الوصف

DSE201 C25 A30 – N Black

Type: Residual Current Circuit Breaker with Overcurrent Protection DSE201 – 1P – 30 mA – 25 A – C – Type A

Description: 1P+N electronic RCBO in one-module width for the protection of end user single-phase circuits against overload and short-circuit currents; protection against the effects of sinusoidal alternating earth fault currents; protection against indirect contacts and additional protection against direct contacts (with sensitivity = 30 mA). Presence of neutral (blue or black) and functional earth (white) flying leads. The neutral is unswitched.

Electrical Characteristics: Rated current: 25 A, Rated residual current: 30 mA, Rated operational voltage: 230 / 240 V AC, Rated insulation voltage: 500 V, Rated impulse withstand voltage: 4 kV, Rated breaking capacity: 6 kA, Energy limiting class: 3, Tripping characteristic: C, Rated frequency: 50 … 60 Hz, Power loss: Total 3.8 W, Overvoltage category: III.

Mechanical Characteristics: Number of poles: 1P, Number of protected poles: 1, Number of modular spacings per DIN rail: 1, Operating characteristic: Instantaneous, Actuator type: Toggle – Insulation group IIIA, black, sealable in ON-OFF positions, Earthing switch type: Undelayed, Housing type: Insulation group II, RAL 7035, Screw terminal type: Failsafe Bi-directional Cylinder-lift Terminal, Position of neutral terminals: Right, Contact position indication: Red ON / Green OFF.

Connections: Power supply connection: Bottom, Connecting capacity busbar: 10 mm², Rigid conductor: 1 to 25 mm², Flexible conductor: 1 to 16 mm², Rated cross section multi-wired: 1 to 25 mm², Rated cross section solid-core: 25 mm², Wire stripping length top: 11 mm, Wire stripping length bottom: 12.5 mm, Terminal type: Screw terminals. Tightening torque top: 1.2 N·m, bottom: 2.8 N·m.

Environmental and Compliance: Ambient air temperature operation: -25 to 55 °C, Storage: -40 to 70 °C, Degree of protection terminals: IP20, housing: IP40, Pollution degree: 2, Resistance to vibrations: 20 cycles with load 0.8 In: 5g or 0.35 mm 5 – 150 Hz, Resistance to shock IEC 60068-2-27: 30g / 2 shocks / 13 ms. RoHS compliant according to EU Directive 2011/65/EU, REACH compliant, Conflict minerals policy observed, WEEE category: 5 Small Equipment (No External Dimension More Than 50 cm), Business to Consumer.

Dimensions and Weight: Width: 1.8 cm, Height: 10 cm, Depth: 6.9 cm, Built-in depth: 6.89 cm, Net weight: 180 g.

Mounting: Mounting type DIN-Rail, Mounting position: Any.

Standards: Complies with IEC 61009-1, IEC 61009-2-2, AS/NZS 61009.1 standards.

Customs Tariff Code: 85362000.

Post Views: 2٬538

معلومات إضافية

الوزن	0.2 كيلوجرام
الأبعاد	6.9 × 1.8 × 10 سنتيميتر
Product ID	2CSR255153R1254
Catalog Description	Residual Current Circuit Breaker with Overcurrent Protection DSE201 – 1P – 30 mA – 25 A – C – Type A
Long Description	1P+N electronic RCBO in one-module width for the protection of end user single-phase circuits against overload and short-circuit currents; protection against the effects of sinusoidal alternating earth fault currents; protection against indirect contacts and additional protection against direct contacts (with sensitivity = 30 mA). Presence of neutral (blue or black) and functional earth (white) flying leads. The neutral is unswitched
Extended Product Type	DSE201 C25 A30 – N Black
ABB EcoSolutions	Yes
Recyclability Rate EN45555	80.56
ABB Site Meeting Group Waste To Landfill Target	No non-hazardous waste is sent to a landfill, UL 2799 Zero Waste To Landfill Validation available
Sustainable Material Content Packaging wt pct	98
Extended Product Lifetime	Product Durability
Type of Residual Current	Type A
Maximum Operating Voltage V	264
Test Voltage V	195 … 264
Dielectric Test Voltage kV	2
Rated Residual Breaking Capacity I Delta m kA	6
Rated Service Short Circuit Breaking Capacity Ics kA	6
Maximum Surge Current kA	0.25
Power Supply Connection	Bottom
Contact Position Indication	Red ON / Green OFF
Energy Limiting Class	3
Electrical Endurance cycles	10000
Mechanical Endurance cycles	20000
Number of Protected Poles	1
Number of Poles	1P
Number of Modular Spacings per DIN Rail	1
Operating Characteristic	Instantaneous
Position of Neutral Terminals	Right
Top Tightening Torque N m	1.2
Bottom Tightening Torque N m	2.8
Actuator Type	Toggle – Insulation group IIIA, black, sealable in ON-OFF positions
Earthing Switch Type	Undelayed
Housing Type	Insulation group II, RAL 7035
Screw Terminal Type	Failsafe Bi-directional Cylinder-lift Terminal
Options Provided	None
Accessories Available	No
Connecting Capacity Busbar mm2	10
Connecting Capacity Rigid mm2	1…25
Connecting Capacity Flexible mm2	1…16
Rated Cross Section Multi Wired mm2	1…25
Rated Cross Section Solid Core mm2	25…25
Wire Stripping Length Top mm	1.1
Wire Stripping Length Bottom mm	1.25
Terminal Type	Screw Terminals
Short Circuit Current Rating SCCR A	0.03
Tripping Characteristic	C
Rated Operational Voltage V AC	230 / 240
Rated Insulation Voltage Ui V	500
Rated Impulse Withstand Voltage Uimp kV	4
Input Voltage Type	AC
Rated Current In A	25
Rated Residual Current mA	30
Rated Short Circuit Capacity kA	6
Rated Conditional Short Circuit Current Inc kA	6
Rated Frequency Hz	50 … 60
Power Loss W	3.8
Overvoltage Category	III
RoHS Declaration	2CSC422006K2701
RoHS Information	Following EU Directive 2011/65/EU
RoHS Date	20140630
REACH Declaration	Reach Declaration – ABB S.p.A. Vittuone
REACH Information	True – contains substances > 0.1 mass percentage
REACH Date	20240429
Conflict Minerals Reporting Template	Conflict Minerals Reporting Template
WEEE Category	5. Small Equipment (No External Dimension More Than 50 cm)
WEEE B2C B2B	Business To Consumer
Ambient Air Temperature Operation min C	-25
Ambient Air Temperature Operation max C	55
Ambient Air Temperature Storage min C	-40
Ambient Air Temperature Storage max C	70
Reference Ambient Air Temperature C	30
Degree of Protection Terminals	IP20
Degree of Protection Housing	IP40
Pollution Degree	2
Environmental Conditions	28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %
Resistance to Vibrations	20 Cycles with Load 0.8 In: 5g or 0.35mm 5 … 150 Hz
Resistance to Shock IEC 60068 2 27	30g / 2 shocks / 13 ms
Built In Depth cm	6.89
Package Level 1 Units	box 1 piece
Package Level 1 Gross Weight kg	0.2
Declaration of Conformity CE	EU Declaration of Conformity_DSE201
Mounting Type	DIN-Rail
Mounting Position	Any
Data Sheet	Technical data sheet DSE201
Mechanical Drawings 3D and 2D	DSE201 – 3D Drawing, DSE201 – 2D Drawing
ETIM 9	EC000905 – Earth leakage circuit breaker
ETIM 10	EC000905 – Earth leakage circuit breaker
eClass	V11.0 : 27142207
Object Classification Code	F
Standards	IEC 61009-1, IEC 61009-2-2, AS/NZS 61009.1
Customs Tariff Code	85362000

DSE201 C25 A30 – N Black

الوصف