الوصف
SH202M-C16 Miniature Circuit Breaker
Model: SH202M-C16
Type: Miniature Circuit Breaker – SH200M – 2 Poles – 16 A – Characteristic C – AC 10 kA
Electrical Specifications: Rated operational voltage according to IEC 60898-1 is 400 V with operational voltage range between 12 V and 440 V AC. Rated insulation voltage is 440 V with impulse withstand voltage 4 kV typically and up to 6.2 kV at sea level. Rated current is 16 A, rated short-circuit capacity is 10 kA AC and conditional short-circuit current is 16 kA. Rated frequency is 50/60 Hz.
Mechanical and Electrical Endurance: Electrical endurance is 20000 AC cycles and mechanical endurance is 20000 cycles. Energy limiting class 3 ensures effective protection.
Physical Dimensions: Width is 3.5 cm, height is 8.8 cm, depth/length is 6.9 cm. Built-in depth (t2) is also 6.9 cm. Product net weight is 0.21 kg; pole net weight is 0.125 kg. Installation size is acc. to DIN 43880 1, width in number of modular spacings is 2.0.
Material and Construction: Housing made of insulation Group II material, colored RAL 7035. Actuator is a toggle type with black insulation material, sealable. Screw terminal type is cage terminal with screw terminals. Recommended screwdriver is Pozidriv 2.
Connection Capacity: Flexible with ferrule 0.75 to 16 mm², flexible 0.75 to 16 mm², rigid 0.75 to 25 mm², stranded 0.75 to 25 mm², conductor maximum 25 mm².
Torque and Mounting: Tightening torque is 2 N·m. Mounting on TH35-15 (35 x 15 mm) and TH35-7.5 (35 x 7.5 mm) mounting rails acc. to IEC 60715. Mounting position can be any.
Environmental and Protection: Operating ambient temperature range is -25 to +55 °C; storage temperature -40 to +70 °C. Degree of protection IP20, enclosure with cover IP40, pollution degree 2. Resistant to vibration and shock acc. to IEC 60068-2-27 standard.
Compliance and Certification: Meets IEC/EN 60898-1 standard. RoHS compliant following EU Directive 2011/65/EU and amendment 2015/863. REACH compliant without substances over 0.1 mass percentage. WEEE category 5 for small equipment with no external dimension more than 50 cm. Certification agencies: EN and IEC.
Additional Information: Contact position indication ON/OFF, energy limiting class 3, accessories available, actuator marking I/O. Power loss is 5 W total at rated operating conditions 2.5 W per pole. Overvoltage category III.
